CALL 800-985-6929
Mon-Fri 7AM - 7PM CST
Power: 0.75 hp
Output Speed: 3.3 – 33 rpm
Output Torque: 1118 – 7229 lb-in
Weight: 87.5 lb
UNICASE Helical Worm Gearboxes are angular gearboxes available in multiple stages where the motor shaft and the output shaft form a 90° angle. This allows for flexible mounting options where installation space is limited. The helical gears of UNICASE worm gearboxes are made of high alloy steel with case-hardened teeth. Optimized geometries and precise shaft alignment provide excellent load-bearing capacity, long operating life, and quiet operation.
The worm stage has a hardened cylinder worm as well as a worm gear with a special bronze rim welded to it. This combination ensures ultimate reliability.
UNICASE worm gearboxes are factory lubricated for life with high-quality, synthetic lubricant. This lubricant prevents friction, provides a high degree of efficiency, and further increases the life of these gearboxes.
NORD’s 2-stage SK 02040 UNICASE worm gearboxes have been redesigned as SK 02040.1 gearboxes. Made from high-strength aluminum or die-cast aluminum, these units guarantee maximum strength and rigidity in a lightweight, compact unit. Their universal mounting design offers significant customer advantages, including fast installation.
Catalog | Nord Helical Worm Catalog |
Users Manual | Nord Helical Worm Manual |
Dimensions | Nord Helical Worm Dimensions |
Order Form | Nord Helical Order Form |
Gearbox Selection
Below are some guideline steps to help aid in
the gearbox selection.
1. Determine the speed and/or gear ratio (see order form)
2. Determine the required power or torque (see order form)
3. Determine Service Factor
4. Select the basic gearbox type and input
5. Determine the required mounting position
6. Select options
7. Checks – overhung load, thrust load, NEMA motor weight, thermal considerations, and other application considerations
Mounting Positions
X | Foot-mounted housing |
F | B5 flange |
Z | B14 flange |
V | Solid shaft |
L | Double solid shaft |
A | Hollow shaft |
B | Fastening element |
EA | Hollow shaft with internal spline |
S | Shrink disc |
M | GRIPMAXX |
H | Hollow shaft cover |
SH | Shrink disc cover |
VL | Reinforced output bearings |
D | Torque arm |
SCP | Screw conveyor package (SCP) |
VI | Fluoro-rubber seals (FKM) |
2WD | Double-output shaft seals |
OV | Open vent |
DR | Spring-loaded breather / AUTOVENTTM |
OSG | Oil sight glass |
OC | Oil cooler |
OA | Oil expansion chamber |
W | Solid input shaft |
IEC/NEMA | IEC and NEMA motor adapter |