CALL 800-985-6929
Mon-Fri 7AM - 7PM CST
Power: 3.0 hp
Output Speed: 5.3 – 21 rpm
Output Torque: 8819 – 35416 lb-in
Weight: 304 lb
The CLINCHER™ Parallel Shaft gearboxes have an offset between the input and output shaft resulting in a shorter or flatter design in comparison with other gearboxes. The CLINCHER™ Parallel Shaft reducers and gearmotors feature a torsionally rigid UNICASE® housing. The CLINCHER™ gearboxes are available as foot, shaft or flange-mounted products. Modular design allows many input options including an integral motor, NEMA or IEC adapter, or a solid input shaft.
The CLINCHER™ Parallel Shaft gearboxes are also offered in a spread bear-ing/flange-mount (B5) design and are commonly specified on agitators, mixers, overhead conveyors and shredders. The lower bearing is an oversized, double row, re-greaseable spherical bearing designed to absorb high load conditions and provide longer service life.
Catalog | Nord Clincher Catalog |
Users Manual | Nord Clincher Users Manual |
Dimensions | Nord Clincher Dimensions |
Order Form | Nord Clincher Order Form |
Gearbox Selection
Below are some guideline steps to help aid in
the gearbox selection.
1. Determine the speed and/or gear ratio (see order form)
2. Determine the required power or torque (see order form)
3. Determine Service Factor
4. Select the basic gearbox type and input
5. Determine the required mounting position
6. Select options
7. Checks – overhung load, thrust load, NEMA motor weight, thermal considerations, and other application considerations
Mounting Positions
A | Keyed hollow shaft |
ADP | Additional drain plug |
B | Fixing element kit |
D | Torque arm |
DR | Autovent |
EA | Hollow shaft with spline |
F | B5 flange |
FV | Filtered vent |
H | Hollow shaft cover |
H66 | IP66 hollow shaft cover |
K | Bottom mount torque arm |
L | Double solid shaft |
LL | Long term storage |
MDP | Magnetic drain plug |
OA | Oil expansion chamber |
OC | Oil cooler |
OSG | Oil sight glass |
OV | Open vent |
PR | B5 flange pilot removal |
R | Backstop |
S | Shrink disc |
RLS | Backstop in the W input |
SCP | Screw conveyor package |
SM5 | Stainless steel output shaft |
SWV | Special solid shaft |
SWA | Special hollow shaft |
V | Solid Shaft |
VI | (FKM) Fluoro-rubber seals |
VL | Heavy Duty Output Bearings |
VL2 | Sread bearing Design |
VL3 | Spread bearing design with oil safe dry cavity |
VL4 | Drywell with heavy duty drop bearings |
VS | Heavy Duty Shrunk Disc |
X | Foot Mounted |
XF | Foot mount with B5 flange |
XZ | Foot mount with B14 flange |
Z | B14 flange |