Nord SK 4282/12 63 S/4

Request Quote

Power: 0.16 hp
Output Speed: 1.3 – 2.4 rpm
Output Torque: 2759 – 5299 lb-in
Weight: 151 lb

The CLINCHER™ Parallel Shaft gearboxes have an offset between the input and output shaft resulting in a shorter or flatter design in comparison with other gearboxes. The CLINCHER™ Parallel Shaft reducers and gearmotors feature a torsionally rigid UNICASE® housing. The CLINCHER™ gearboxes are available as foot, shaft or flange-mounted products. Modular design allows many input options including an integral motor, NEMA or IEC adapter, or a solid input shaft.

The CLINCHER™ Parallel Shaft gearboxes are also offered in a spread bear-ing/flange-mount (B5) design and are commonly specified on agitators, mixers, overhead conveyors and shredders. The lower bearing is an oversized, double row, re-greaseable spherical bearing designed to absorb high load conditions and provide longer service life.


Catalog Nord Clincher Catalog
Users Manual Nord Clincher Users Manual
Dimensions Nord Clincher Dimensions
Order Form Nord Clincher Order Form

Gearbox Selection

Below are some guideline steps to help aid in
the gearbox selection.
1. Determine the speed and/or gear ratio (see order form)
2. Determine the required power or torque (see order form)
3. Determine Service Factor
4. Select the basic gearbox type and input
5. Determine the required mounting position
6. Select options
7. Checks – overhung load, thrust load, NEMA motor weight, thermal considerations, and other application considerations

Mounting Positions

Gearbox Options

A Keyed hollow shaft
ADP Additional drain plug
B Fixing element kit
D Torque arm
DR Autovent
EA Hollow shaft with spline
F B5 flange
FV Filtered vent
H Hollow shaft cover
H66 IP66 hollow shaft cover
K Bottom mount torque arm
L Double solid shaft
LL Long term storage
MDP Magnetic drain plug
OA Oil expansion chamber
OC Oil cooler
OSG Oil sight glass
OV Open vent
PR B5 flange pilot removal
R Backstop
S Shrink disc
RLS Backstop in the W input
SCP Screw conveyor package
SM5 Stainless steel output shaft
SWV Special solid shaft
SWA Special hollow shaft
V Solid Shaft
VI (FKM) Fluoro-rubber seals
VL Heavy Duty Output Bearings
VL2 Sread bearing Design
VL3 Spread bearing design with oil safe dry cavity
VL4 Drywell with heavy duty drop bearings
VS Heavy Duty Shrunk Disc
X Foot Mounted
XF Foot mount with B5 flange
XZ Foot mount with B14 flange
Z B14 flange