Nord SK 2282 80 LP/4

Power: 1.0 hp
Output Speed: 17 – 47 rpm
Output Torque: 1355 – 3679 lb-in
Weight: 78 lb

The CLINCHER™ Parallel Shaft gearboxes have an offset between the input and output shaft resulting in a shorter or flatter design in comparison with other gearboxes. The CLINCHER™ Parallel Shaft reducers and gearmotors feature a torsionally rigid UNICASE® housing. The CLINCHER™ gearboxes are available as foot, shaft or flange-mounted products. Modular design allows many input options including an integral motor, NEMA or IEC adapter, or a solid input shaft.

The CLINCHER™ Parallel Shaft gearboxes are also offered in a spread bear-ing/flange-mount (B5) design and are commonly specified on agitators, mixers, overhead conveyors and shredders. The lower bearing is an oversized, double row, re-greaseable spherical bearing designed to absorb high load conditions and provide longer service life.

CATALOG & MANUALS

Catalog	Nord Clincher Catalog
Users Manual	Nord Clincher Users Manual
Dimensions	Nord Clincher Dimensions
Order Form	Nord Clincher Order Form

Gearbox Selection

Below are some guideline steps to help aid in
the gearbox selection.
1. Determine the speed and/or gear ratio (see order form)
2. Determine the required power or torque (see order form)
3. Determine Service Factor
4. Select the basic gearbox type and input
5. Determine the required mounting position
6. Select options
7. Checks – overhung load, thrust load, NEMA motor weight, thermal considerations, and other application considerations

Mounting Positions

Gearbox Options